Epson WP-M4595DNF - Manual (Page 77)

G
Select the Image Type setting.
H
Select an appropriate resolution for your original(s) as the Resolution setting.
I
Click Preview to preview your image(s). The Preview window opens and displays your image(s).
& “Previewing and Adjusting the Scan Area” on page 77
Note for the Automatic Document Feeder (ADF):
❏ The ADF loads your first document page, and then Epson Scan prescans it and displays it in the Preview
window. The ADF then ejects your first page.
Place your first document page on top of the rest of the pages, and then load the entire document into the ADF.
❏ Do not load paper above the line just under the d arrow mark on the ADF.
J
Select the size of the scanned image(s) as the Target Size setting if necessary. You can scan your images at their
original size, or you can reduce or enlarge their size by selecting Target Size.
K
Adjust the image quality if necessary.
& “Image Adjustment Features” on page 63
Note:
You can save the settings you make as a group of custom settings with a Name, and later apply these custom settings
when scanning. Your custom settings are also available in Epson Event Manager.
See the Help for more details on Epson Event Manager.
L
Click Scan.
M
In the File Save Settings window, select the Type setting and then click OK.
Note:
If the Show this dialog box before next scan check box is cleared, Epson Scan starts scanning immediately without
displaying the File Save Settings window.
Your scanned image is saved.
Previewing and Adjusting the Scan Area
Selecting a preview mode
Once you have selected your basic settings and resolution, you can preview your image and select or adjust the image
area in a Preview window. There are two types of preview.
❏ Normal preview displays your previewed image(s) in their entirety. You can select the scan area and make any
image quality adjustments manually.
User’s Guide
Scanning
77