Epson WP-M4595DNF - Manual (Page 56)

How to make a poster from your prints
The following is an example of how to create a poster with 2x2 Poster selected for Multi-Page and Overlapping
Alignment Marks
selected for Print Cutting Guides.
A
Cut off the margin of Sheet 1 along a vertical line through the center of the top and bottom cross-marks:
B
Place the edge of Sheet 1 on top of Sheet 2 and align the cross-marks, then temporarily tape the two sheets
together from the back:
C
Cut the taped sheets in two along a vertical line through the alignment markers (this time, a line to the left of the
cross-marks):
User’s Guide
Printing
56