Precision Digital PD6080 - Manual (Page 50)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
50
Setting the Relay Action (act 1)
Operation of the relays is programmed in the Action menu. The relays may be set up for any of the
following modes of operation:
1. Auto Automatic reset (non-latching)
2. A-nman Automatic + manual reset at any time (non-latching)
3. latcH Latching (manual reset only, at any time)
4. lt-CLr Latching with Clear (manual reset only after alarm condition has cleared)
5. Altern Pump alternation control (automatic reset only)
6. Sanmpl Sampling (the relay is activated for a user-specified time)
7. oFF Off (relay state controlled by Interlock feature)
The following graphic shows relay 1 action setup; relay 2-8 are set up in a similar fashion.
Use Up Arrow
to scroll through
the menu
choices below.
relay 1
relay
relay 1
relay