Precision Digital PD6080 - Manual (Page 68)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
68
Password Menu
Making Changes to a Password Protected Scanner
If the scanner is password protected, the scanner will display the message Locd (Locked) when the Menu
button is pressed. Press the Enter button while the message is being displayed and enter the correct
password to gain access to the menu. After exiting the programming mode, the scanner returns to its
password protected condition.
Disabling Password Protection
To disable the password protection, access the Password menu and enter the correct password twice, as
shown below. The scanner is now unprotected until a new password is entered.
Run Mode
Enter
Password
Enter
Password
If the correct six-digit password is entered, the scanner displays the message unLoc (Unlocked) and the
protection is disabled until a new password is programmed.
If the password entered is incorrect, the scanner displays the message Locd (Locked) for about two
seconds, and then it returns to Run Mode. To try again, press Enter while the Locked message is
displayed.
Did you forget the password?
The password may be disabled by entering a
master password once. If you are authorized
to make changes, enter the master password
508655 to unlock the scanner.