PLANET WGSW-48000 - Manual (Page 128)

User’s Manual of WGSW-48000
128
4.9.5 SNMP Trap Station
Configure SNMP trap on this page. The SNMP Trap Configuration screen in Figure 4-9-7 and Figure 4-9-8 appears.
Figure 4-9-7 SNMP Trap Station
Figure 4-9-8 Add new SNMP Trap Station
The page includes the following fields:
Object Description
• Trap Station ID Click on Trap Station ID to edit or remove trap station.
• Community String Indicates the community string for this trap station.
• Link Change Trap Indicates if link up and link down traps are sent.
• Remote IP Address Indicates the IP address which traps are sent.
• Boot Up Trap Indicates if WarmStart and ColdStart traps are sent.
• Version Indicates the SNMP version of the trap station.
• Add New Trap Station Creates a trap station.