PLANET WGSW-48000 - Manual (Page 148)

User’s Manual of WGSW-48000
148
• Server IP Address Specifies IP address of the server inn dotted decimal notation.
• Service UDP Port
Specifies UDP port of the server. The possible range is 1 to 65535.
The default value is 514.
• Facility
Specifies the facility value to be used when logs are recorded in the remote
server. See RFC 3164 for more details.
Only one facility can be assigned to a single server. If a second facility level is
assigned, the first facility is overridden. All applications defined for a device utilize
the same facility on a server. The possible field values are Local 0 - Local 7.
The field default is Local 7.
When a severity level is selected, all severity level choices above the selection are selected
automatically.
4.11.11 Memory Logs
The Memory Log screen contains all system logs in a chronological order that are saved in RAM (Cache), Log Index which
shows the log number, Log Time at which the log was generated, Severity which shows the log severity, and the description that
shows log message text.
Figure 4-11-11 Memory Logs