PLANET WGSW-48000 - Manual (Page 267)

User’s Manual of WGSW-48000
267
Qos port-based status
Description:
This command is used to set port-based status.
Syntax:
qos port-based status {enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
6.4.4 Rate-limit Command
Description:
rate-limit egress
rate-limit egress enable token bsize
Description:
This command limits egress rate, which the unit is Kbps.
Syntax:
rate-limit egress enable token bsize <Burst Size Value>
Parameters:
<Burst Size Value>
Mode
Interface Config
rate-limit egress disable
Description:
This command disable egress rate limit.
rate-limit ingress
Description:
This command limits ingress rate, which the unit is Kbps.
Syntax:
rate-limit ingress <rate>
Parameters:
<rate>
Mode
Interface Config