Enable, Save, 2 privileged mode commands – PLANET WGSW-48000 User Manual
Page 171: Cable-diag port
Advertising
User’s Manual of WGSW-48000
171
Parameters:
{<port#> | all}
Mode
User Mode
enable
Description:
Enter into the Privileged Mode
Syntax:
enable
Mode
User Mode
Save
Description:
This command is used to save configurations
6.2 Privileged Mode commands
cable-diag port
Description:
This command is used to proceed cable diagnostic
Syntax:
cable-diag port <port ID>
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Mode
Privileged Mode
Example
Switch# cable-diag port 1
Advertising