Access-list name <name> set portlist, 17 arp command, Arp dynamic – PLANET WGSW-48000 User Manual
Page 247: Arp dynamic aging-time, Arp dynamic ports, 7 arp command
User’s Manual of WGSW-48000
247
access-list name <name> set portlist
Description:
This command is used to specify an acl entry to be work on a list of ports.
Syntax:
access-list name <name> set portlist <LINE | port_id>
Parameters:
<LINE | port_id>
Mode
Global Config
6.3.17 ARP Command
arp dynamic
Description:
This command enables and disables dynamic arp functions.
Syntax:
arp dynamic {enable|disable}
Parameters:
{enable|disable}
Mode
Global Config
arp dynamic aging-time
Description:
This command set arp dynamic aging-time between 0s and 999s.”0”means disable.
Syntax:
arp dynamic aging-time <0~999>
Parameters:
<0~999>
Mode
Global Config
arp dynamic ports
Description:
This command set dynamic arp ports to trust and un-trust.
Syntax: