Dhcpsnooping ports, Dhcpsnooping ports trust, Dhcpsnooping ports untrust – PLANET WGSW-48000 User Manual
Page 253: Dhcpsnooping vlan, Dhcpsnooping vlan add
User’s Manual of WGSW-48000
253
Parameters:
{enable|disable}
Mode
Global Config
dhcpsnooping ports
Description:
This command is used to set ports to trust or untrust.
dhcpsnooping ports trust
Description:
This command is used to set ports to trust
Syntax:
dhcpsnooping ports trust <port-list>
Parameters:
<port-list>
Mode
Global Config
dhcpsnooping ports untrust
Description:
This command is used to set ports to untrust
Syntax:
dhcpsnooping ports untrust <port-list>
Parameters:
<port-list>
Mode
Global Config
dhcpsnooping vlan
Description:
This command is used to configure dhcp vlan.
dhcpsnooping vlan add
Description:
This command is used to enable dhcp snooping in a specified vlan.
Syntax:
dhcpsnooping vlan add from <vlan-id> to <vlan-id>