PLANET WGSW-48000 - Manual (Page 248)

User’s Manual of WGSW-48000
248
arp dynamic ports {trust|untrust} <port-list>
Parameters:
{trust|untrust}
<port-list>
Mode
Global Config
Example
Swtich<Config># arp dynamic ports trust 1-4
Swtich<Config># arp dynamic ports untrust 4
arp dynamic vlan
Description:
This command set add/remove dynamic arp on specified vlan.
Syntax:
arp dynamic vlan {add|remove} from < vlan -id> to < vlan -id>
Parameters:
{add|remove}
< vlan -id>
Mode
Global Config
Example
Swtich<Config># arp dynamic vlan add from 1 to 1
Swtich<Config># arp dynamic vlan remove from 1 to 1
arp static
Description:
This command set arp static address table for mac address with IP Address.
Syntax:
arp static {add|delete} vid <1~4094> ip <A.B.C.D> mac <mac-address>
Parameters:
{add|delete}
<1~4094>
<A.B.C.D>
<mac-address>
Mode
Global Config