PLANET WGSW-48000 - Manual (Page 198)

User’s Manual of WGSW-48000
198
6.3 Global Config mode commands
exit
Description:
This command is used to exit current shell
Syntax:
exit
Mode
Global Config
6.3.1 VLAN Command
This command is used to configure vlan
vlan add
Description:
This command is used to create a new vlan or some vlans
vlan add number
Description:
This command enter a vlan ID
Syntax:
vlan add number <vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
vlan add range
Description:
This command enter a range of vlan ID
Syntax:
vlan add range from < vlan-ID > to <vlan-ID>
Parameters:
< vlan-ID > to <vlan-ID>
Mode
Global Config