PLANET WGSW-48000 - Manual (Page 270)

User’s Manual of WGSW-48000
270
6.4.5 Spanning tree Command
spanning-tree cost
Description:
This command configure RSTP port path cost, path cost value:0~200000000.
Syntax:
spanning-tree cost <pathcost>
Parameters:
<pathcost>
Mode
Interface Config
spanning-tree edge
Description:
This command configure edge property
Syntax:
spanning-tree edge {enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
Example
Switch(Interface 1)# spanning-tree edge enable
spanning-tree force-p2plink
Description:
This command configure force point to point link mode.
Syntax:
spanning-tree force-p2plink {auto|enable|disable}
Parameters:
{auto|enable|disable}
Mode
Interface Config
spanning-tree migration-check
Description:
This command re-checks the appropriate BPDU format to send on this port