3 port-security command, Port-security, Auto-negotiate – PLANET WGSW-48000 User Manual
Page 265: Speed, Flow-control
User’s Manual of WGSW-48000
265
auto-negotiate
Description:
Configure auto-negotiate mode on a port
Syntax:
auto-negotiate {enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config
speed
Description:
Set port speed to 10Mbps half duplex/ 10Mbps full/ 100Mbps half/ 100Mbps full/ 1000Mbps 100FX mode/1000base-x full .
Syntax:
speed {10hd | 10fd | 100hd | 100fd | 1000fd | 100fx | 1000base-x}
Parameters:
{10hd | 10fd | 100hd | 100fd | 1000fd | 100fx | 1000base-x}
Mode
Interface Config
flow-control
Description:
This command enable/disable flow-control on ports.
Syntax:
flow-control {enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config
6.4.3 Port-security Command
port-security
Description:
This command add or delete a static mac into mac security table.
Syntax:
port-security {add|delete} <sourcemac >
Parameters: