Access-list name <word> set mac-mode, Access-list name <word> set mac-mode mac sa, Access-list name <word> set mac-mode mac da – PLANET WGSW-48000 User Manual
Page 246: Access-list name <word> set mac-mode ether-type
User’s Manual of WGSW-48000
246
Mode
Global Config
access-list name <WORD> set mac-mode
Description:
Specify ACL entry priority.
access-list name <WORD> set mac-mode mac SA
Description:
This command specifies a source mac address.
Syntax:
access-list name <WORD> set mac-mode mac SA <mac-addr> <mask-addr>
Parameters:
<mac-addr>
<mask-addr>
Mode
Global Config
access-list name <WORD> set mac-mode mac DA
Description:
This command specifies a destination mac address.
Syntax:
access-list name <WORD> set mac-mode mac DA <mac-addr> <mask-addr>
Parameters:
<mac-addr>
<mask-addr>
Mode
Global Config
access-list name <WORD> set mac-mode ether-type
Description:
This command specifies the ether type of the packet.
Syntax:
access-list name <WORD> set mac-mode ether-type {ipv4|ARP|xns}
Parameters:
{ipv4|ARP|xns}
Mode
Global Config