PLANET WGSW-48000 - Manual (Page 269)

User’s Manual of WGSW-48000
269
<rate>
Mode
Interface Config
Example
Switch(Interface 1)# storm-control broadcast-unknown 64
storm-control all-cast
Description:
This command storm control limited value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps and 0 means
no limit.
Syntax:
storm-control all-cast <rate>
Parameters:
<rate>
Mode
Interface Config
rmon-counter
Description:
This command specifies rmon counter capability on a port
Syntax:
rmon-counter {enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config
set igmp-router-port
Description:
This command specifies a igmp router port .
Syntax:
set igmp-router-port {enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config