PLANET WGSW-48000 - Manual (Page 206)

User’s Manual of WGSW-48000
206
6.3. 4 Log Command
log
Description:
This command is used to configure log server
log log-server
Description:
This command is used to configure log server
log log-server name <WORD>add
Description:
This command is used to specify log server name, enter a name, up to 12 characters, add a log server IP address
Syntax:
log log-server name <WORD> add ipaddr word
Parameters:
<WORD>
Mode
Global Config
log log-server name <word> delete
Description:
This command is used to delete a log server
Syntax:
log log-server name <WORD> delete
Parameters:
<WORD>
Mode
Global Config
log logging-target
Description:
This command is used to configure log notification level