PLANET WGSW-48000 - Manual (Page 231)

User’s Manual of WGSW-48000
231
<second>
Mode
Global Config
sntp server
sntp server enable
Description:
This command enables sntp server.
Syntax:
sntp server enable
Mode
Global Config
sntp server ipaddr
Description:
This command sets sntp server IP address.
Syntax:
sntp server ipaddr <IP-addr>
Parameters:
<IP-addr>
Mode
Global Config
sntp server polling
Description:
This command sets sntp server polling time interval.
Syntax:
sntp serve polling <0-9>
Parameters:
<0-9>
Mode
Global Config
sntp timezone
Description:
This command sets sntp timezone.