Access-list name <word> {enable|disable, Access-list name <word> set, Access-list name <word> set priority – PLANET WGSW-48000 User Manual
Page 244: Access-list name <word> set ip-mode, Access-list name <word> set ip-mode src ip, Access-list name <word> set ip-mode dst ip
User’s Manual of WGSW-48000
244
access-list name <WORD> {enable|disable}
Description:
This command enables/disables the ACL entry.
Syntax:
access-list name <WORD> {enable|disable}
Mode
Global Config
access-list name <WORD> set
access-list name <WORD> set priority
Description:
This command specifies ACL entry priority.
Syntax:
access-list name <WORD> set priority <0-65535>
Parameters:
<0-65535>
Mode
Global Config
access-list name <WORD> set IP-mode
access-list name <WORD> set IP-mode SRC IP.
Description:
This command specifies a source IP address.
Syntax:
access-list name <WORD> set IP-mode SRC IP <IP-addr> <mask-addr>
Parameters:
<IP-addr>
<mask-addr>
Mode
Global Config
access-list name <WORD> set IP-mode DST IP
Description:
This command specifies a destination IP address.
Syntax:
access-list name <WORD> set IP-mode DSP IP <IP-addr> <mask-addr>