Dhcpsnooping dyamic, Dhcpsnooping dynamic add ip, Dhcpsnooping dynamic delete ip – PLANET WGSW-48000 User Manual
Page 255
User’s Manual of WGSW-48000
255
<A.B.C.D>
<mac-address>
<port-id>
<vlan-id>
Mode
Global Config
dhcpsnooping dyamic
Description:
This command is used to configure dhcp dynamic entry.
dhcpsnooping dynamic add ip
Description:
This command is used to add a dynamic dhcp entry.
Syntax:
dhcpsnooping dynamic add ip <A.B.C.D> mac <mac-address> port <port-id> vid <vlan-id> lease-time <1..9999999>
Parameters:
<A.B.C.D>
<mac-address>
<port-id>
<vlan-id>
Mode
Mode Global Config
dhcpsnooping dynamic delete ip
Description:
This command is used to delete a dynamic dhcp entry.
Syntax:
dhcpsnooping dynamic delete ip <A.B.C.D> mac <mac-address> port <port-id> vid <vlan-id> lease-time <1...9999999>
Parameters:
<A.B.C.D>
<mac-address>
<port-id>
<vlan-id>
Mode
Global Config