PLANET WGSW-48000 - Manual (Page 199)

User’s Manual of WGSW-48000
199
vlan delete
Description:
This command remove a existed vlan.
Syntax:
vlan delete <vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
vlan port
Description:
This command is used to configure 802.1Q port parameters for vlans
vlan port all
Description:
This command is used to configure all ports
vlan port all port-configure
Description:
This command is used to configure ports in a specific vlan.
Syntax:
vlan port all port configure <vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
vlan port all protected
Description:
This command is used to configure protected ports.
Syntax:
vlan port all protected {enable|disable}
Parameters:
{enable|disable}
Mode
Global Config