Port-all portsec-lockmode dynamic max-entries, Port-all rate-limit, Port-all rate-limit egress – PLANET WGSW-48000 User Manual
Page 217: Port-all rate-limit ingress, Port-all rmon-counter
Advertising

User’s Manual of WGSW-48000
217
port-all portsec-lockmode dynamic max-entries
Description:
This command enable limited dynamic lock mode.
Syntax:
port-all portsec-lockmode dynamic max-entries <0-24>
Parameters:
<0-24>
Mode
Global Config
port-all rate-limit
Description:
Configure rate limit value on all ports.
port-all rate-limit egress
Description:
This command specifies egress rate limit.
Syntax:
port-all Rate-Limit egress <value>
Parameters:
<value>
Mode
Global Config
port-all rate-limit ingress
Description:
This command specifies ingress rate limit.
Syntax:
port-all rate-limit ingress <value>
Parameters:
<value>
Mode
Global Config
port-all rmon-counter
Description:
This command configures rmon counter capability on ports.
Advertising