PLANET CV3P Series - Manual (Page 40)

Cam Viewer 3 Pro User’s Manual
40
3.5.2 E-map - Detail setting
This page allows users to define new camera groups, E-Map image, and the positions of each
camera (or camera group).
By default, all the cameras should be listed in the tree-view list on the left (as shown below). All
cameras should be listed under the “Home” group (or Group#1):
Top group (E-Map layer) Sub group (Sub E-Map layer)
Cameras in- side a
camera group
Cameras not in a camera group
Top group
(E-Map
layer)
(Sub E-Map
layer)