ProSoft Technology 5205-104S-PDPS - Manual (Page 92)

4205/5205-TS-104S-PDPS ♦ ProLinx Standalone Reference
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
Page 92 of 128 ProSoft Technology, Inc.
July 12, 2007
Status Data Area
This area stores error codes, counters, and port status information for each port.
Configuration File
This file contains module configuration information such as port configuration,
network information, and command configuration. This configuration file is
transferred to or from the module.
Optional Web Server for Ethernet Solutions
An HTML server is available for Ethernet ProLinx modules. With this option,
HTML text pages can be enabled to:
Display module internal register and status values
Accept user data input values via POST commands for setpoint, on/off
control, etc.
Provide limited graphic file support
Type Specifications
HTML Server (See note below)
Key features of the HTML server include:
Max HTML page size: 1MB
Max File Storage: 32MB
Supported context types: jpeg, bmp, css
Supported data types: bit, ASCII, integer, float
Sockets: Up to five connections. Note that this limits the number of simultaneous
graphic file and frame references per HTML page
FTP Server Permits remote HTML file transfer between the module and remote host.
Capabilities of the FTP Server include:
Single socket connection
Non-passive transfers only
WS_FTP or Command Line FTP recommended
CuteFTP, Internet Explorer, Netscape, or NCFTP all support multiple socket
connections and therefore are not supported by the ProLinx module
Email Client E-mail message generation based on database trigger values. Messages can
contain dynamic data from the module
Important Note: The Web Server is not designed to act like, or replace, the
powerful web servers available in the marketplace today. Please check
application specifics with Technical Support if you are unsure if your
application will work with the ProLinx Web Server.
4.1.3 Hardware Specifications
Specification Description
Power Supply
24 VDC nominal
18 to 32 VDC allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Current Load 500 mA max@ 32 VDC max
Operating Temperature –20 to 50°C (–4 to 122°F)
Storage Temperature –40 to 85°C (–40 to 185°F)
Relative Humidity 5% to 95% (non-condensing)