ProSoft Technology 5205-104S-PDPS - Manual (Page 99)

Reference 4205/5205-TS-104S-PDPS ♦ ProLinx Standalone
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
ProSoft Technology, Inc. Page 99 of 128
July 12, 2007
EndModule
Module = "4 Words Output" 0x63
EndModule
Module = "5 Words Output" 0x64
EndModule
Module = "6 Words Output" 0x65
EndModule
Module = "7 Words Output" 0x66
EndModule
Module = "8 Words Output" 0x67
EndModule
Module = "9 Words Output" 0x68
EndModule
Module = "10 Words Output" 0x69
EndModule
Module = "11 Words Output" 0x6A
EndModule
Module = "12 Words Output" 0x6B
EndModule
Module = "13 Words Output" 0x6C
EndModule
Module = "14 Words Output" 0x6D
EndModule
Module = "15 Words Output" 0x6E
EndModule
Module = "16 Words Output" 0x6F
EndModule
4.3 Slave Error and Status Data
The 104S Driver Error and Status Data areas are discussed in this section. This
data represents a collection of status, diagnostic and troubleshooting registers
which may prove helpful in troubleshooting the 104S network and port operation.
The data map functionality of the module must be utilized in order to map this
data into the normal module database region (0 to 3999). All or any portion of the
data can be moved using this facility.
The data area is initialized with zeros whenever the module is initialized. This
occurs during a cold-start (power-on), reset (reset push-button pressed) or a
warm-boot operation (commanded or loading of new configuration).
4.3.1 General Communication Status and Client 0 Status
Status Register Name Description
10200 t0 Timeout Count This word contains the number of t0 errors
recognized by the module.
10201 t1 Timeout Count This word contains the number of t1 errors
recognized by the module.
10202 t2 Timeout Count This word contains the number of t2 errors
recognized by the module.
10203 t3 Timeout Count This word contains the number of t3 errors
recognized by the module.