Canon EOS M10 - Manual (Page 131)

131
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Sending Images Automatically (Image Sync)
Images on the memory card that have not been transferred already can
be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Preparing the Camera
Register [ ] as the destination. You can also assign [ ] to the [ ] button,
so that you can simply press the [ ] button to send any unsent images on
the memory card to a computer via CANON iMAGE GATEWAY. On the
destination computer, you will install and configure Image Transfer Utility,
free software compatible with Image Sync.
1
Add [ ] as a destination.
● Add [ ] as a destination, as described in
“Registering CANON iMAGE GATEWAY”
(= 121).
● To include a Web service as the
destination, log in to CANON iMAGE
GATEWAY (= 123), select your camera
model, access the Web service settings
screen, and choose the destination
Web service in Image Sync settings.
For details, refer to CANON iMAGE
GATEWAY Help.
2
Choose the type of images to send
(only when sending movies with
images).
● Press the [ ] button and choose
[Wi-Fi Settings] on the [ 4] tab (= 32).
Adding Comments
Using the camera, you can add comments to images that you send
to e-mail addresses, social networking services, etc. The number of
characters and symbols that can be entered may differ depending on the
Web service.
1
Access the screen for adding
comments.
● On the image transfer screen, choose
[ ] by pressing the [ ][ ][ ][ ] buttons,
and then press the [ ] button.
2
Add a comment (= 33).
3
Send the image.
● When a comment is not entered, the comment set in CANON
iMAGE GATEWAY is automatically sent.
● You can also annotate multiple images before sending them. The
same comment is added to all images sent together.