Changing the focus setting fine-tuning the focus, Fine-tuning the focus, Changing the focus setting – Canon EOS M10 User Manual
Page 74
74
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Fine-Tuning the Focus
Still Images
Movies
Fine-tune autofocusing with an EF-M lens attached by turning the focusing
ring.
1
Configure the setting.
●
Press the [
] button, choose [Focus
mode] on the [ 2] tab, and then choose
2
Focus.
●
Press the shutter button halfway to focus
on the subject, and continue holding the
button halfway down.
3
Fine-tune the focus.
●
Turn the focusing ring on the lens to
adjust the focus.
●
[MF] blinks on the screen.
●
To cancel focusing, release the shutter
button.
4
Shoot.
●
Press the shutter button all the way down
to shoot.
●
Cannot be used with Servo AF (= 73).
●
Not available with lenses other than EF-M lenses.
Changing the Focus Setting
Still Images
Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
●
Press the [
] button, choose
[Continuous AF] on the [ 2] tab, and
then choose [Off] (= 32).
On
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press
the shutter button halfway.
Off
Conserves battery power, because the camera does not
focus constantly. However, this may delay focusing.