Canon EOS M10 - Manual (Page 89)

89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
● To cancel all changes on the [ 1] tab and restore defaults,
choose [Clear all Custom Func. (C.Fn)] on the screen in step 1
and press the [ ] button.
● [H] is not available when [Highlight tone priority] is set to [D+]
(= 66), even with [ISO expansion] set to [1:Enable].
● Safety shift is disabled when the flash fires.
● AF-assist beam: Light from the front lamp when the shutter
button is pressed halfway in low-light conditions, which assists in
focusing.
● Automatic lens retraction when powered off is available for lenses
that support this feature.
Type of
Function
Function Description
Exposure
ISO expansion
Set to [1:Enable] for the option of
setting the ISO speed to [H]. [H]
corresponds to ISO 25600, or in [ ]
mode, ISO 12800.
Safety shift
Set to [1:Enable] for automatic
adjustment of the shutter speed and
aperture value to bring the exposure
level closer to standard exposure
if standard exposure would not
be available otherwise under your
specified shutter speed or aperture
value in [ ] or [ ] mode.
Autofocus
AF-assist beam
(LED) firing
Set to [1:Disable] to disable the AF-
assist beam.
Others
Custom Controls
Assign commonly used functions to
specific buttons (= 90).
Release shutter
w/o lens
Set to [1:Enable] to enable shooting
without a lens attached, either by
pressing the shutter button or movie
button.
Retract lens on
power off
Specify whether the lens should be
retracted automatically when you
turn the camera off.