Flashes on the screen, Date and time of recording are not correct, No information displayed on the screen – Nikon COOLPIX P950 Digital Camera User Manual
Page 269: Date stamp] not available
269
Troubleshooting
flashes on the screen.
• The camera clock has not been set. Set the date and time in the setup menu
[
• If the camera clock has not been set, images and movies saved before the clock is
set are dated “00/00/0000 00:00” and “01/01/2020 00:00” respectively.
Date and time of recording are not correct.
Set the date and time in the setup menu [
]. The
camera clock is not as accurate as ordinary watches or clocks. Periodically compare
the time of the camera clock with that of a more accurate timepiece and reset as
required.
No information displayed on the screen.
Shooting and photo information may be hidden. Press the
button until
information is displayed.
Switching the information displayed on the screen (
[Date stamp] not available.
The camera clock has not been set. Set the date and time in the setup menu
[
Date not stamped on images even when [Date stamp] is
enabled.
• The current shooting mode does not support [
Date stamp
].
Notes about [Date stamp] (page 233)
• A function that restricts the [
Date stamp
] function is enabled.
Functions that cannot be used simultaneously when shooting (page 127)
• The date cannot be stamped on movies.
Screen for setting time zone and date is displayed when the
camera is turned on.
The camera settings reset.
The clock battery is exhausted; all settings were restored to their default values.
Configure the camera settings again.
The internal clock battery is used to power the camera clock and to retain certain
settings. Charging time of the clock battery takes about 10 hours when you insert the
battery into the camera or connect the AC adapter (available separately) to the
camera, and the clock battery operates for several days even after the camera battery
is removed.