The camera cannot focus, Colored stripes appear on the screen when shooting, Images are blurred – Nikon COOLPIX P950 Digital Camera User Manual

Page 271: Bright specks appear in images captured with flash

Advertising
background image

271

If there is a problem

Troubleshooting

The camera cannot focus.

• The subject is too close. Try shooting using the following.

- [

Close-up (page 86)

] scene mode

- [

Macro close-up

] focus mode

Selecting the focus mode (page 106)

• Incorrect focus mode setting. Check or change the setting.

Selecting the focus mode (page 106)

• The subject is hard to focus on.

Subjects not suitable for autofocus (page 111)

• Select the setup menu [

AF assist (page 235)

] [

Auto

].

• Subject is not in focus area when the shutter-release button is pressed halfway.

• The focus-mode selector is set to

(manual focus).

- To shoot using autofocus, set the focus-mode selector to

(autofocus).

- To shoot using manual focus, focus manually.

Using manual focus (page 113)

• Turn the camera off and then on again.

• The camera may move slightly when operated, even if it is attached to a tripod,

which may interfere with the autofocus.

Colored stripes appear on the screen when shooting.

Colored stripes may appear when shooting subjects with repeating patterns (such as

window blinds); this is not a malfunction.

The colored stripes will not appear in captured images or recorded movies. However,

when using [

Continuous H: 120 fps

] or [

HS 480/4×

], the colored stripes may be

seen in the captured images and recorded movies.

Images are blurred.

• Use the flash.

Flash mode (page 99)

• Use the vibration reduction feature. You can also use [

Electronic VR

] when

recording movies.

Electronic VR (page 207), Vibration reduction (page 234)

• Use a tripod to stabilize the camera (using the self-timer setting of [

10s

] (10

seconds) at the same time is more effective).

Using a tripod (page 51), Self-timer (page 102)

Bright specks appear in images captured with flash.

The flash is reflecting off particles in the air. Lower the built-in flash.

Using the built-in flash (page 52)

Advertising