Close-up, Frame the subject and take a picture, Select [ noise reduction burst ] or [ single shot – Nikon COOLPIX P950 Digital Camera User Manual

Page 86

Advertising
background image

86

Shooting features

Scene mode (shooting suited to the shooting conditions)

2

Frame the subject and take a picture.

The camera focuses on the area in the center of the frame. The position of the area

cannot be moved.

The camera focuses at infinity.

For [

Hand-held

]:

-

While the icon on the shooting screen is displayed in green, press the shutter-
release button all the way to capture a series of images which are combined into a

single image and saved.

-

Once the shutter-release button is pressed all the way, hold the camera still until a

still image is displayed. After taking a picture, do not turn the camera off before

the screen switches to the shooting screen.

For [

Tripod

]:

-

One image is captured at a slow shutter speed when the shutter-release button is

pressed all the way.

Notes about [Hand-held]

The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.

Continuous shooting may not be possible in certain shooting conditions.

Notes about [Tripod]

Vibration reduction is disabled regardless of the setup menu [

Vibration reduction

]

setting. See “ Using a tripod (page 51)” when using a tripod.

Close-up

Use when taking close-up pictures of small subjects such as flowers and insects.

Rotate the mode dial to

button

Close-up

button

Option

Description

Noise reduction burst

This enables you to shoot a sharp image with a minimum of

noise.

Single shot

(default setting)

Saves images with emphasized outlines and contrast.

1

Select [Noise reduction burst] or [Single shot].

Advertising