HP 8360 - Manual (Page 167)

Arrow Keys
Programming Codes SCPI: No specific command is available, but the key can be
addressed, see SCPI Key Numbers.
Analyzer: NONE
See Also Menu, List Menu
“Entry Area” and “Creating and Applying the User Flatness
Correction Array” in Chapter 1.
Function Group
Menu Map
Description
Programming Codes
See Also
USER DEFINED
NONE
This lets you select any and assign its function to
1 of 12 user defined keys in the
[ USER DEFINED )
Menu. The following
message appears on the synthesizer display: Press MENU KEY to
be assigned. Complete are assigned not just the key label.
For example, assigning List Menu to the user defined menu, copies
the complete structure (keypath) of that key. All of the pages and
lower level menus are placed within the user defined menu.
SCPI: SYSTem:KEY:ASSign <n>,<n>
The first <n> in the above command, corresponds to the key number
to be assigned, while the second <n> corresponds to the user menu
key where it is to be placed in the user menu.
Analyzer: NONE
SCPI Key Numbers, USER DEFINED
Operating and Programming Reference HP 8360
User’s Handbook