HP 8360 - Manual (Page 35)

Entry Area All function values are changed via the rotary knob and/or keys of
the entry area.
ENTRY ENTRY ON
LED ARROW KEY’S
ENTRY
ROTARY KNOB
TERMINATOR
NUMERIC
ENTRY KEYS BACKSPACE
Figure Entry Area
The following are active only when the synthesizer expects an input.
( ENTRY ON / OFF ): This key lets you turn off or on the active entry
area. Turning off the entry area after a value is entered prevents
accidental changes.
ENTRY ON LED: This LED lights when the entry area is active.
Arrow Keys: The up/down arrow keys let you increase or decrease
a numeric value. The left/right arrow keys choose a significant
digit indicated by an underline.
Rotary Knob: The rotary knob increases or decreases a numeric
value. The rotary knob can be used in combination with the
left/right arrow keys to change the increment size.
Terminator Keys: After the numeric entry keys are used to enter a
value, these keys define the units.
Negative Sign/Backspace Key: If a data entry is in progress, this
key backspaces over the last digit entered, otherwise a negative
sign is entered.
Numeric Entry Keys: These keys enter specific numbers in the
active entry area and must be followed by one of the terminator
keys before the function value changes.
Getting Started Basic