HP 8360 - Manual (Page 196)

Doubler Amp Mode Off
Programming Codes
POWer:AMPLifier:STATE:AUTO
POWer:AMPLifier:STATE:AUTO?
Analyzer: NONE
See Also Menu
Doubler Amp Mode Off
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User’s Handbook
POWER
5
This is applicable to instrument models with a doubler
installed. The doubler has an integral amplifier whose operation is
controlled by the instrument firmware. This turns off the
automatic mode of operation and turns off the amplifier so that it is
never used. This is unspecified mode of operation since the output
power may not be at the maximum leveled output power specification
at frequencies generated in the doubled mode. This
has no
effect on instruments without a doubler.
An asterisk next to the key label indicates that this feature is active.
POWer:AMPLifier:STATE
POWer:AMPLifier:STATE?
Analyzer: NONE
Dblr
Menu
Operating and Programming Reference