HP 8360 - Manual (Page 425)

INSTALLATION
This chapter provides installation instructions for the HP 8360
series synthesized sweeper and its accessories. It also provides
information about initial inspection, damage claims, preparation for
use, packaging, storage, and shipment.
CAUTION This product is designed for use in Installation Category II and
Pollution Degree 2 per IEC 1010 and 664, respectively.
Initial Inspection Inspect the shipping container for damage. If the shipping container
or cushioning material is damaged, it should be kept until the
contents of the shipment have been checked for completeness and
the synthesizer has been checked mechanically and electrically. The
contents of the shipment should agree with the items noted on the
packing slip. Procedures for checking the basic operation of the
synthesizer are in the “Operator’s Check and Routine Maintenance”
chapter. You will find procedures for checking electrical performance
in the “Performance Tests” chapter of your manual set.
If there is any electrical or mechanical defect, or if the shipment is
incomplete, notify the nearest Hewlett-Packard office. If the shipping
container is damaged, or if the cushioning material shows signs of
stress, notify the carrier as well as the Hewlett-Packard office. Keep
the shipping material for the carrier’s inspection. The HP office
will arrange for repair or replacement without waiting for a claim
settlement .
Specifications INSTALLATION 3-1