HP 8360 - Manual (Page 412)

Analog Power Sweep Range: -20 to maximum available power, can be offset using
step attenuator.
External Leveling R a n g e
At External HP
Detector: -36 to
At External Leveling Input: -200 to -0.5 volts
Source Match
Typical HP Power Flatness
4.1
-0.2
0.01 26.5
Frequency
50
Bandwidth
External Detector Mode: 10 or 100
(sweep speed and
modulation mode dependent), nominal
Power Meter Mode: 0.7 Hz, nominal
(internally leveled),
< 20 SWR
< 40 SWR
< 50 SWR
Typically SWR at frequencies below 50 MHz.
Specifications