HP 8360 - Manual (Page 279)

POWER
Function Group POWER
Menu Map
Description This accesses the power function softkeys.
Menu Accesses the in the flatness
correction menu.
Power Offset Changes the displayed power to include
an offset, but does not change the
output power of the synthesizer.
Power Slope Activates the linear, power-per-frequency
mode of power output, and makes RF
slope (dB/GHz) the active function.
Power Sweep Activates power sweep mode and makes
power sweep
the active
function.
Set Activates uncoupled attenuator as
the mode of operation and makes the
attenuator value the active function.
Tracking Menu Accesses the in the tracking
calibration menu.
Uncouples the attenuator from the ALC
system.
Power Allows you to enter values for the power
level step size.
All RF power functions except for power level, flatness on/off, and
RF on/off are contained in the power menu.
Programming Codes SCPI: NONE
Analyzer: NONE
See Also listed above, ON / OFF ], ( POWER LEVEL ), and
“Getting Started Basic” and “Getting Started Advanced,” in
Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
HP 8360
User’s Handbook Operating and Programming Reference