HP 8360 - Manual (Page 220)

FREQUENCY
Freq Offset
List Menu
Sets the frequency offset value and applies
it to all frequency parameters.
Displays the frequency list create/edit
softkeys.
Step Swp Menu Reveals the stepped frequency sweep edit
soft keys.
Size CW Sets the frequency step size in the CW
frequency mode.
Up/Down Size Swept Sets the frequency step size in the swept
frequency mode.
zoom Places the synthesizer in the sweep
mode, where the rotary knob and numeric
entry keys control CF, and the up/down
arrow keys control AF.
See Also listed above.
“Optimizing Synthesizer Performance” in Chapter 1.
Freq
Function Group FREQUENCY
Menu Map
Description This lets you set a frequency multiplier value and applies it to
all frequency parameters. Any integer value between and including
is accepted. Changing the multiplier value changes the display,
it does not affect the output of the synthesizer.
For example:
1. Set the start frequency to 4
2. Set the stop frequency to 10
3. Set the frequency multiplier to 5.
Note that the display indicates and
asterisks appear next to the frequency data.
4. Now set the stop frequency to 30 The synthesizer frequency
is 6 or 30 5.
Frequency multiplier and offset are related as shown by the following
equation:
Entered value or Displayed Frequency (Frequency
Generated x Multiplier) + Offset value
Operating Programming Reference HP 8360
User’s Handbook