HP 8360 - Manual (Page 198)

8360 Adrs
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This lets you change the HP-IB address of the synthesizer.
Enter the address desired using the numeric entry keys or the
up/down arrow keys. The address value may be set between 0 and
30. The synthesizer stores the address value in non-volatile memory.
The default address of the synthesizer is 19.
SCPI: SYSTem:COMMunicate:GPIB:ADDRess
Analyzer:
NONE
Connectors, HP-IB Menu
“Getting Started Programming,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Enter
Function Group
Menu Map
Description
POWER
5
This lets you enter a power correction value for a frequency
point in the flatness array. A frequency point must be entered before
a correction value can be accepted, otherwise the following error
message appears:
ERROR Must first enter correction freq. The up/down arrow
keys let you scroll through the frequency points available for power
correction. If no correction value is entered for a frequency point, the
synthesizer display indicates Undefined. The range of acceptable
values is -40 to
An asterisk next to the key label indicates
that this feature is active.
HP 8360
User’s Handbook Operating and Programming Reference E-l