Models, Options – HP 8360 User Manual
Page 480
control signal
to
S-parameter Test
D-submilliature
rearpanel.)
only)
Outputs the pulse modulation waveform that is supplied to the modulator. This can be either
the
generated pulse modulation signal.
female,
panel.)
Pulse Sync Gut
only)
Outputs a 50 wide
pulse synchronized to the leading edge of the
intemally-generatcd
female, rear panel.)
AM/FM Output
002 only)
the
AM or
waveform. This output can drive 50 ohms or
The FM scaling depends on the FM deviation selected.
female, rear
Models
001 Add
Attenuator
With this option, minimum
output power is -110
Maximum leveled output
Option 002
Internal Modulation Generator
Adds a
internal modulation waveform
to the
HP
It provides signals that would otherwise
supplied to the external modulation
inputs.
003 Delete
For security, tamper-resistance, and
sayings in automated system
this
option deletes the
and display.
003 does NOT move the front panel
connectors to the rear
however, so in most cases,
004 should be
in
with option 003.
option
Rear
output
Moves RF
Input, Pulse
Input, and FM Input
Option 006 Fast Pulse
puke
time to 10
Also effects maximum leveled output
and
harmonic
Not available on the
and
1
Resolution
700 MATE
programming commands for
system
option 806 Rack
Kit
Used to
mount
while
to
spaces.
Used to rack mount
without
handles
option 910 Extra
service Manuals
HP 8360
User’s Handbook
Change A 5-21