HP 8360 - Manual (Page 175)

Clear
Clear Memory
Function Group SYSTEM
Menu Map
Description This causes the synthesizer to return to the factory preset
instrument state, after writing alternating ones and zeroes over all
state information, frequency lists, and save/recall registers a selected
number of times. When you select Clear Memory , the synthesizer
displays the following in the active entry area:
# OF TIMES TO CLEAR MEMORY: X
Enter the number of times the state information should be
overwritten. While the synthesizer is working to overwrite the state
information, it flashes the count on the display.
This causes the synthesizer to recall the original calibration
data stored in permanent memory (EEROM) all list and user ALC
correction data will be lost.
Programming Codes
SYSTem:SECurity:COUNt <n>
SYSTem:SECurity[:STATe] ON
SYSTem:SECurity[:STATe] OFF
The transition from on to off triggers the blanking. Sending the “off’
message by itself will do nothing.
Analyzer:
SHKZOHZ
See Also Security Menu
“Using the Security Features” in Chapter 1.
HP 8360
User’s Handbook Operating and Programming Reference