HP 8360 - Manual (Page 189)

Deep AM
Function Group MODULATION
Menu Map
Description This activates distortion reduction mode for deep AM
operation. Deep AM automatically switches to the ALC off leveling
mode when the modulation level drives the “detector-logger” (part
of the RF components, see Figure A-l) below its detection range.
The modulated waveform is DC coupled and ALC leveled above -13
Below -13 the waveform is DC controllable but not ALC
leveled, and is subject to drift of typically This value
is reduced by a factor of 10 if the low ALC bandwidth feature is
selected. An asterisk next to the key label indicates that this feature
is active.
Programming Codes
AM:MODE DEEP
AM:STATe
Analyzer: NONE
See Also AM
“Optimizing Synthesizer Performance” in Chapter 1.
Delay Menu
Function Group
Menu Map
Description This (Option 002 only) accesses the pulse delay softkeys.
These let you delay the internally generated pulsed output
from either the PULSE SYNC OUT signal or from the external pulse
signal at the PULSE input.
P e l a y Delays the output pulse from the
PULSE SYNC OUT signal.
Pulse Delay Trig’d Delays the output pulse from the
PULSE input.
Operating and Programming Reference HP 8360
User’s Handbook