Siemens Simatic S7-400 - Manual (Page 336)

Analog Modules
5-120
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Table 5-69 Measuring Ranges of the SM 431; AI 16 x 16 Bit, continued
Method Selected Description Measuring Range
Module Setting
Measuring Range
(Type of Sensor)
R-3L: Resistor
(three-conductor terminal)
300
W
600 W
6000 W ( max. 5000 W)
A You will find the digitized
analog values in Section
5.3.1 in the resistance
measuring range
R-4L: Resistor
(four-conductor terminal)
48 W
150 W
300 W
600 W
6000 W ( max. 5000 W)
measuring range
TC-L: Thermocouple
(linear)
(temperature
measurement) Type B
Type N
Type E
Type R
Type S
Type J
Type L
Type T
Type K
Type U
A You will find the digitized
analog values in Section
5.3.1 in the temperature
range
RTD-3L: thermal resistor
linear, three-conductor
terminal (temperature
measurement)
Pt 100 climatic
Pt 200 climatic
Pt 500 climatic
Pt 1000 climatic
Ni 100 climatic
Ni 1000 climatic
A You will find the digitized
analog values in Section
5.3.1 in the temperature
range
RTD-4L: thermal resistor
linear, four-conductor
terminal (temperature
measurement)
Pt 100 standard
Pt 200 standard
Pt 500 standard
Pt 1000 standard
Ni 100 standard
Ni 1000 standard
Default Settings
The default settings of the module in STEP 7 are “Voltage” for the measuring
method and “
"
10 V” for the measuring range. You can use this combination of
measuring method and measuring range without parameterizing the SM 431;
AI 16
16 Bit in STEP 7.