0 disassembling the liebert ds for transport, 1 required equipment, 2 disassembly-downflow units – Liebert Precision Cooling System DS User Manual

Page 52: Isassembling, Iebert, Ransport, Required equipment, Disassembly—downflow units, Notice, Warning

Advertising
background image

Disassembling the Liebert DS for Transport

42

6.0

D

ISASSEMBLING

THE

L

IEBERT

DS

FOR

T

RANSPORT

The Liebert DS has a modular frame construction that allows separating the unit into three sections.

Each of these sections is more easily maneuvered through tight spaces or placed in small elevators.
A qualified service technician with the required tools and recommended assistance can disassemble

an air-cooled unit in about four hours, assuming refrigerant evacuation is not required.
This procedure requires four or more people for lifting the filter and electric box assembly on down-

flow units and for lifting the blower and electric box assembly on upflow units.

NOTICE

Disassembling this unit requires substantial work, including reclaiming refrigerant and

charging the unit, cutting and brazing refrigerant lines, cutting and brazing water lines,

disconnecting and reconnecting electrical lines and moving heavy, bulky equipment. One

member of the crew disassembling the unit must be qualified in wiring, brazing and

refrigeration.
Improperly disassembling or reassembling the Liebert DS may affect warranty.

6.1

Required Equipment

• Piano jacks
• Stepladder for downflow units
• Refrigeration tools

6.2

Disassembly—Downflow Units

For detailed views of downflow units, see Figures 37 through 45.
1. Remove the unit from its shipping skid before beginning (refer to 5.2 - Unpacking the Unit).
2. Remove all panels except the top front accent.
3. Remove all filters. This allows access to the screws for metal plate blocking off the top coil and

removal of the filter plate.

4. All wires are hot-stamped and all circuit board connectors are lettered to ease connection. Some

cable ties must be cut and replaced. Refer to the unit’s wiring schematic on the unit’s deadfront

panel for details.

!

WARNING

Risk of explosive discharge from high-pressure refrigerant. Can cause injury or death.
This unit contains fluids and/or gases under high pressure. Relieve pressure before working

with piping, compressors or other internal components.

!

WARNING

Risk of top heavy unit falling over. Improper handling can cause equipment damage, injury,

or death.
Read all instructions before attempting to move or lift unit. Installation and service of this

equipment should be done only by properly trained and qualified personnel who have been

specially trained in the installation of air conditioning equipment.

!

CAUTION

Risk of sharp edges and heavy parts. Can cause personal injury.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,

shoes and glasses should attempt to move, lift, remove packaging from or prepare unit for

installation.

Advertising