Pioneer CDJ-400 - Manual (Page 9)

BEFORE OPERATING (CONNECTIONS)
9
<DRB1451>
En
English
3. Connecting to other devices
A Connecting to a stereo amplifier (when not using a DJ mixer)
B Connecting to a component with digital input connectors
÷ The DIGITAL OUT connectors produce audio data only (without subcodes; CD graphics are not supported).
÷ Depending on the CD recorder or other component connected, some recording or other functions may be limited. For details,
consult the operating instructions for the connected component.
C Connecting to a Computer
÷ Supported computer operating systems include Windows Vista, Windows XP, Windows 2000, and Mac OS 10.3 or later.
÷ When used with Windows 2000, a special MIDI driver must be installed before performing connections.
÷ A special ASIO driver is also available to allow audio signals to be output from computer.
÷ Please visit the following website to download special drivers, and for more information about the Pioneer DJ software
program “DJS.”
http://www.prodjnet.com/support/
4. Connecting the power cord
After all other connections have been made, connect the power cord to the AC inlet on the rear panel of the player and connect the
power plug to an AC wall outlet or to a power receptacle on the rear panel of the amplifier.
Connect to the CD or AUX input connectors
(Do not use the PHONO input connectors.)
Supplied audio cable
Stereo amplifier
CDJ-400
CD recorder or amplifier with
digital inputs
Digital signal cable
CDJ-400
Computer
USB cable
Connect to USB port.
CDJ-400