GE Industrial Solutions AF-300 C11 - Manual (Page 38)

Change during operation: N = impossible, Y* = possible (enabled by using ), Y= possible (enabled by using )
-36-
FUNC
DATA
Func-
tion
code
No.
Name Setting range
Unit
Min.
unit
Factory
setting
Change
during
operation
User
setting
P00
Motor characteristics
0 to 10
- -
2 Y
Func-
tion
code
No.
Name Setting range
Unit
Min.
unit
Factory
setting
Change
during
operation
User
setting
H01 Operation time Operation time accumulation
100Hr
1 0 -
H02 Trip history The contents of the last four alarms are
displayed sequentially. - - --- -
H03 Data initialization 1: Initialized
(return to factory setting value) - - 0 N
H04
Auto-reset 0: Inactive
1: Active (5 times fixed)
- -
0 Y*
H06
Fan Stop Operation 0: Inactive
1: Active
- -
0 Y*
H20
PID control
( Mode select)
0: Inactive
1: Active (Normal operation)
2: Active (Inverse operation)
- -
0
N
H21 (Feedback signal) 0: Terminal [12]
(0 to +10Vdc) Input
1: Terminal [C1]
(4 to 20mAdc) Input
2: Terminal [ 12]
(+1 to +5Vdc) Input
- - 1 N
H22 ( P-gain ) 0.01 to 10.0 times (1to1000%) -
0.01 0.01 Y
H23 ( I-gain) 0.0s : Inactive
0.1 to 999s
s 0.1 0.0 Y
H24 (D-gain) 0.00s : Inactive
0.01 to 10.0s
s 0.01 0.00 Y
H25 ( Feedback filter) 0.0 to 60.0s s 0.1 0.5 Y
H: High Performance Functions
P: Motor Parameters