GE Industrial Solutions AF-300 C11 - Manual (Page 83)

- 81 -
Item Specifications Remarks
Frequency jump
control • Jump frequency (3 points) and jump hysteresis width (1 point) can be pre-
set.
Restart after
momentary
power failure
• Drive restarts without causing drive-trip when power supply recovers.
Control
PID control • PID control function is provided standard.
Enclosure
(IEC 60529) • IP20
Cooling method • Natural cooling for 1 HP or less, Fan cooling for 2 HP or more
Running,
stopped • Output frequency, output current, and PID reference value/feedback value
The CRG lamp is on when the capacitor is charged.
Program mode • Function code and data code
Tripped [Cause of trip by code]
• OC1 (Overcurrent: during acceleration)
• OC2 (Overcurrent: during deceleration)
• OC3 (Overcurrent: while running at constant speed)
• OU1 (Overvoltage: during acceleration)
• OU2 (Overvoltage: during deceleration)
• OU3 (Overvoltage: while running at constant speed)
• LU (Undervoltage)
• OH1 (Overheating: Heat sink)
• OH2 (Overheating: External alarm)
• OL (Overload: Motor)
• OLU (Overload: Drive)
• Er1 (Memory error)
• Er3 (CPU error)
• Er6 (Operation error)
• Er8 (RS485 communication error)
• Lin (Input phase failure)
Indication
Running,
Tripped • Fault history data is stored and indicated for the past four trips. Data is
retained while power is off.