GE Industrial Solutions AF-300 C11 - Manual (Page 52)

Change during operation: N = impossible, Y* = possible (enabled by using ), Y= possible (enabled by using )
-50-
FUNC
DATA
Motor sound
(sound tone)
This function adjusts the motor operation sound when a value of 7 or less is set with function F26.
0 Level 0
to
3 Level 3
FM terminal (voltage adjust)
This function regulates the frequency meter voltage level output to the FM terminal in the range from 0
to 200% (in 1% step).
0 ( Full scale about 0Vdc )
to
2 0 0 ( Full scale about 11Vdc )
FM terminal (Function)
This function selects the contents of output to the FM terminal.
0 Output frequency (maximum output frequency = 100%)
1 Output current (drive rated current x 2 = 100%)
2 PID feedback value (full scale = 100%)
3 DC link circuit voltage (500Vdc = 100%)
11V 200%
Note : Output to the FM terminal is pulse output
with constant frequency and variable duty.
Variable
Approx. 13V
50% 100%
Output/full scale Fixed to 121.6Hz
Output
voltage
F27
F31
Factory
setting
Change during
operation
0 Y*
F30
Factory
setting
Change during
operation
100% Y
Factory
setting
Change during
operation
0 Y
5V 50%
100% 10V