Familiarization with safety requirements, Electrical preparations – Agilent Technologies Option H48 Multiport Test Set Z5623A User Manual
Page 20
2 -4
Agilent Technologies Z5623A Option H48
Installation
Familiarization with Safety Requirements
Familiarization with Safety Requirements
This document contains two types of safety notices: Warnings and
Cautions.
A Warning denotes a hazard that may endanger the operator.
A Caution denotes a hazard that may endanger the instrument.
Before proceeding to the Electrical Preparations described in the next
section, turn to
Chapter 9, “Safety and Regulatory Information,”
and
review the Warnings, Cautions, and safety markings that apply to this
instrument.
Electrical Preparations
1. Ensure that the
“Electrical Requirements” on page 1-6
are met.
2. Verify that the power cable is not damaged and that the power
source outlet provides a protective earth ground contact. Note that
Figure 2-1 on page 2-5
depicts only one type of power source outlet.
Refer to
Figure 2-2 on page 2-6
to see the different types of power
cord plugs that can be used with your test set.
Cables are available in different lengths. For descriptions and part
numbers of cables other than those described in
Figure 2-2
, call
Agilent Technologies. Refer to
Chapter 10 , “Contacting Agilent.”
3. If this product is to be powered by autotransformer, make sure the
common terminal is connected to the neutral (grounded) side of the
ac power supply.