Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 27)

Agilent Technologies Z5623A Option H48 2 -11
Installation
Test Set Familiarization
Rear Panel
Figure 2-6 Rear Panel Features
GPIB Connector
This connector allows the test set to be controlled either by the network
analyzer or by an external controller.
GPIB Address Switches
The GPIB Address Switches set the GPIB address of the test set. See
“Setting the GPIB Address of the Test Set” on page 2-13 for
information.
Line Module
The line module contains the power cable receptacle and the line fuse.
Power Cables
The line power cable is supplied in one of several configurations,
depending on the destination of the original shipment.
Each instrument is equipped with a three-wire power cable. When
connected to an appropriate ac power receptacle, this cable grounds the
instrument chassis. The type of power cable shipped with each
instrument depends on the country of destination. See
Figure 2-2,
“Power Cables,” on page 2-6 for the part numbers of these power cables.
WARNING This is a Safety Class I product (provided with a protective
earthing ground incorporated in the power cord). The mains
plug shall only be inserted in a socket outlet provided with a
protective earth contact. Any interruption of the protective
conductor, inside or outside the instrument, is likely to make
the instrument dangerous. Intentional interruption is
prohibited.
Line Module Not Used GPIB
Address
Switches
GPIB
Connector